High thermal & oxidation stability protects against deposit formation and oil thickening, thus enhances the life and performance of lubricant.
Excellent protection from bearing wear and high load carrying property extends the life of components.
Excellent gear protection from micropitting & scuffing and outstanding extreme pressure performance.
Excellent rust and corrosion protection for longer component life.
Compatible with elastomer seals and gaskets, leads to minimum leakage and reduced contamination.
Excellent demulsifying properties, low foaming and good air release characteristics
Specifications Eiffel Axel Ind Gear series meets or exceeds following International and Builder specifications:
Typical Characteristics
| Eiffel Axel Ind Gear | Test Method | Units | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
|---|---|---|---|---|---|---|---|---|---|---|
| AGMA 9005 | – | – | – | 2 EP | 3 EP | 4 EP | 5 EP | 6 EP | 7 EP | – |
| ISO Viscosity Grade | ISO 3448 | – | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
| Density @ 15 0C | ASTM D 4052 | gm/cc | 0.878 | 0.880 | 0.887 | 0.894 | 0.898 | 0.900 | 0.904 | 0.910 |
| Viscosity @ 40 0C | ASTM D 4052 | cSt | 46.8 | 68.9 | 100.8 | 150.2 | 220.5 | 320.9 | 460.8 | 680.5 |
| Viscosity @ 100 0C | ASTM D 4052 | cSt | 6.78 | 8.72 | 11.15 | 14.56 | 18.75 | 23.95 | 30.45 | 37.85 |
| Viscosity Index | ASTM D 2270 | – | 98 | 98 | 95 | 95 | 95 | 95 | 95 | 92 |
| Pour Point | ASTM D 97 | °C | -27 | -27 | -24 | -24 | -24 | -24 | -15 | -12 |
| Flash Point (COC) | ASTM D 92 | °C | 216 | 218 | 226 | 238 | 248 | 248 | 256 | 282 |
| FZG Scuff Fail Stage | A/8.3/90 | – | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ |
| Timken OK Load | ASTM D 2670 | lb/kgf | 65 | 65 | 65 | 75 | 75 | 75 | 75 | 75 |
| Cu Strip Corrosion | ASTM D 130 | – | 1B | 1B | 1B | 1B | 1B | 1B | 1B | 1B |
| Rust Test-Proc B | ASTM D 665 | – | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
| Foam Seq I,II,III | ASTM D 892 | ml/ml | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
